HR CoilsHot-rolled coils are flat steel rolled above the recrystallisation temperature, conforming to IS 2062 in E250 and E350 grades and supplied as feedstock for pipes and CR.
Flat Steel — HR Coils, PM Plates, CR Coils, CR Sheets, GI/GL, and PPGI/PPGL
Flat steel covers HR coils, PM plates, CR coils, CR sheets, GI/GL, and PPGI/PPGL. Specifications are defined by grade, thickness, width, length where applicable, and coating or finish for coated products.
Mill test certificate + GST invoice
Pan-India delivery
Quote within 1 working dayHR CoilsHot-rolled coils are flat steel rolled above the recrystallisation temperature, conforming to IS 2062 in E250 and E350 grades and supplied as feedstock for pipes and CR.
PM PlatesPlates and mill plates are heavy flat steel supplied in cut sizes for structural and heavy fabrication, typically in grades conforming to IS 2062.
CR CoilsCold-rolled coils are HR coils that are further cold-rolled and annealed, conforming to IS 513, and supplied in drawing grades CR1, CR2, and CR3 with specified finishes.
CR SheetsCR sheets are cold-rolled flat steel supplied as cut sheets rather than coils, conforming to IS 513 in CR1, CR2, and CR3 grades.
GI/GLGI and GL are zinc- and aluminium-zinc-coated flat steel, supplied in plain, corrugated, or zero-spangle forms for corrosion-exposed use and graded by coating mass.
PPGI/PPGLPPGI and PPGL are pre-painted galvanised and galvalume coils, coil-coated over a metallic substrate to a specified paint system and shade.How is flat steel specified?
Specifications vary by product, but comparable attributes are presented in a consistent sequence so requirements can be reviewed and quoted on the same basis.
HR Coilsgrade, standard, thickness, width
PM Platesgrade, standard, thickness, width, length
CR Coilsgrade, standard, thickness, width, finish
CR Sheetsgrade, standard, thickness, width, length, finish
GI/GLtype, grade, thickness, width, coating mass
PPGI/PPGLtype, grade, thickness, width, coating mass, paint system and shade
Use only the specification fields relevant to the selected product. Where a standard, certification, performance requirement, finish, coating, packing, or destination requirement applies, state it before requesting a firm quote.
Frequently bought with Flat Steel
Check the latest prices before you fix quantity
Live PricesHRC₹55,250/MT-₹61,500/MTView Prices →CRC₹62,000/MT-₹64,500/MTView Prices →HR Plate₹57,000/MT-₹64,500/MTView Prices →GI Coil₹74,000/MT-₹74,750/MTView Prices →
Pricing depends on the confirmed grade, dimensions, quantity split, finish or coating where applicable, delivery location, and prevailing market conditions. Share the requirement to receive a quote against the stated specification.
What should you confirm before requesting a quote for flat steel?
Start with the exact product, then confirm the relevant specification fields, quantity, delivery location, and any applicable documentation or compliance requirements. Products covered under Flat Steel include HR Coils, PM Plates, CR Coils, CR Sheets, GI/GL, and PPGI/PPGL.
Flat Steel — Frequently Asked Questions
The category covers HR coils, PM plates, CR coils, CR sheets, GI/GL, and PPGI/PPGL.
Share the fields relevant to the selected product. Where type or form, grade, standard, dimensions, finish, packing, or quality parameters apply, provide them in the same sequence shown in the specification section.
A firm quote is prepared against the confirmed product specification, quantity, delivery location, and any applicable documentation or compliance requirements.
OFB: B2B Raw Materials Prices
- Discover: Find what you need.
- Connect: Access approved brands.
- Buy: Order with confidence.
- Pay: Finance with ease.
- Track: Stay updated, always.
Ask VED AI/https%3A%2F%2Fd5nfy7n2jvqm2.cloudfront.net%2Fnew-buyer-imgs%2Fcookie.png){kind=small}