Copper Need, Price Hike, And Green Transformation: A Brief Overview
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2023%2F03%2F3-5.jpg)
Copper is used in a variety of industrial gear and electrical equipment. Due to the trend towards decarbonization, there is an expected generational shift in copper demand. Due to the reopening of the Chinese economy and a falling dollar, copper demand has been robust this year, but concerns are raised over its supply. Protests in Peru, which supplies 10% of the world’s copper supply, are only one example of recent supply concerns.
Copper Is The New Oil
Due to its relevance in the decarbonization drive, copper is the regarded as next oil. All renewable energy sources, including solar, wind, electric vehicles (EVs), and others, require copper. Copper is necessary if something is to be electrified and transmit electricity. Copper is the true pinch point when it comes to the energy revolution.
Copper Prices Likely To Keep Rising
Copper price increases will continue unless they encourage longer exploration cycles, a growth in secondary markets, or an increase in copper recycling. Although there will always be short-term cyclical volatility, copper prices are expected to grow until they set new records somewhere in the second half of the year. Copper prices increase in January 2023 has helped copper mining equities, and these firms’ valuations now appear to be stretched.
Political Capital Invested For Green Transformation
Industrial metals like copper, aluminium, and lithium are expected to profit from the enormous political capital being expended to bring about the green transformation. The European defence sector is likely to experience double-digit growth rates of close to 20% annually throughout the following economic cycle as the continent doubles its military spending as a percentage of GDP as a result of the new geopolitical climate.
Insight
Due to its extensive use, copper serves as a leading indicator of the state of the world economy. Although there are currently short-term supply problems, analysts expect that the trend towards decarbonization will cause a generational shift in copper demand. Since copper is required for renewable energy, its price is predicted to rise until it either encourages prolonged exploration cycles or growth in secondary markets and copper recycling. Industrial metals like copper, aluminium, and lithium will surely profit from the green transformation.
Read More – Zinc’s Early-Year Rally Fizzles Out As Market Prices In Supply Surge
Suggested Readings
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-32.png)
MS Channel Weight: ISMC Size Chart, Uses & Buying Guide
TL;DR: MS channels come in standard ISMC sizes, each with a fixed weight per meter that sets strength and cost. Picking the heaviest option isn’t always the right call; the correct size depends on load, span, and end use. This guide helps procurement managers choose the right channel and source it from verified suppliers on
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-33.png)
MS Angle vs Channel: Steel Section Comparison
TL;DR: MS angle and MS channel are both hot-rolled structural steel sections, but they are not interchangeable. Angles suit bracing and lightweight framing, while channels carry higher loads across a span. This guide compares their standards, weight, cost, and buying process so fabricators and contractors pick the right section on OFB. MS angle and MS
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F06%2Funnamed.png)
TMT Bar Grades Explained: Fe415, Fe500, Fe500D, Fe550, Fe550D, and Fe600
TL;DR: TMT bar grades under IS 1786 run from Fe415 to Fe600, each defined by minimum yield strength and ductility. Grade selection depends on structural load, seismic zone, and project type. This guide helps construction buyers and procurement teams compare all six grades and source verified TMT bars through OFB. Indian construction projects specify TMT
