BlogsMetals Industry Insights
The metals industry forms the backbone of India's infrastructure, construction, and manufacturing sectors. From construction-grade TMT bars to precision-engineered stainless steel components, understanding metal grades, specifications, market dynamics, and industry trends is essential for making informed business decisions. This section covers everything from understanding different steel types and their applications to tracking metal price movements, from deep-dives into manufacturing processes to analysis of trade policies affecting the industry. Whether you're specifying materials for a project or tracking market trends, you'll find expert insights here.
Latest Blogs
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F06%2FTemplate-OFb-23.png)
How to Choose TMT Bars for Construction: Grade, Load and Compliance Guide
TL;DR: Choosing the right TMT bar depends on structural design, load, ductility, project location and quality compliance. Construction buyers should follow the engineer’s specification, verify applicable standards and test documents, and compare suppliers on landed cost rather than selecting reinforcement steel only by price. Choosing TMT bars starts with the structural engineer’s specification—not price, availability
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F11%2FStainless-Steel-7.png)
What are Stainless Steel Uses in Industrial Manufacturing?
TL;DR: Stainless steel is used in food processing, chemical plants, pharma and medical equipment, energy, transport and construction because chromium forms a self-healing oxide layer that resists rust. This guide maps each industrial use to the right grade and shows what to check before buying, so procurement teams can source verified stainless steel on OFB
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F06%2Funnamed.png)
TMT Bar Grades Explained: Fe415, Fe500, Fe500D, Fe550, Fe550D, and Fe600
TL;DR: TMT bar grades under IS 1786 run from Fe415 to Fe600, each defined by minimum yield strength and ductility. Grade selection depends on structural load, seismic zone, and project type. This guide helps construction buyers and procurement teams compare all six grades and source verified TMT bars through OFB. Indian construction projects specify TMT
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F10%2FStainless-Steel-5.png)
Stainless Steel vs Carbon Steel: Cost, Composition, and Industrial Use Case Comparison
TL;DR: Carbon steel vs stainless steel is a procurement decision driven by operating environment, not cost alone. Stainless steel carries a minimum 10.5% chromium content and resists corrosion without surface treatment. Carbon steel has higher carbon content, delivering superior strength and weldability at lower cost — but requires protective coatings in wet or corrosive environments.
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-33.png)
MS Angle and Channel: Difference, Sizes & Weight
TL;DR: MS angle is an L-shaped steel section for bracing and light framing. MS channel is a C-shaped section that carries load across a span. Angles cost less to fabricate, while channels resist bending better. They are not interchangeable. This guide compares shape, weight, size, and cost, so fabricators and contractors can pick the right
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2023%2F03%2FStainless-Steel-3.png)
World’s Top 6 Aluminium Producing Countries
TL;DR: China is the largest aluminium producing country in 2026, at about 43 million tonnes, over 60% of world output. India ranks second at roughly 4.2 million tonnes, followed by Russia and Canada. Gulf output has fallen due to regional conflict, tightening global supply. Mentioned here are the top 10 producers and what it means
/https%3A%2F%2Fd5nfy7n2jvqm2.cloudfront.net%2Fnew-buyer-imgs%2Fcookie.png){kind=small}