/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2021%2F01%2FWebp.net-compress-image-6.jpg)
A sharp rise in raw material prices, (especially steel) over the last few months has impacted the recovery of manufacturing, construction, and small and medium industries from the COVID-19 pandemic.
As the lockdown gradually eased, steel prices have soared on the back of rising demand. The prices of the hot-rolled coil have increased by 54% to Rs 57,000 per tonne in January, as compared to Rs 37,400 per tonne in July last year. The prices of cold-rolled coils have risen 45% during the same period to Rs 60,600 per tonne as against Rs 41,700 per tonne. As a result, the user industries have been facing difficulty in accessing the key raw material and their margins have come under huge pressure.
To understand the reasons behind the bullish prices, we can look at some of the factors affecting the price of steel:
As with any commodity, supply and demand is a huge factor that determines steel prices. The higher the demand and the lower the supply, the higher the price. As lockdowns were gradually eased and construction work resumed, steel prices started rising with the rise in demand.
Moreover, the prices of steel are determined not just by current supply and demand, but by forecasted supply and demand. The more information available, the better this can be predicted, and the less volatile prices will be. We must also strive to be aware of inventory in the supply chain in every link from the steel mills to the end-user.
Price is also influenced by the demand of the various industries steel is used for. If the auto industry is strong, for example, steel demand may be higher; the same goes for construction, packaging, and other businesses that rely heavily upon steel.ย
Scrap metal and iron ore are two of the main materials used to create steel. If there is a limited amount of these resources available, demand exceeds supply, and the cost of materials will jump up.
Iron ore fetching a year-end price of $175 a tonne on the Dalian Commodity Exchange (DCE), is now the worldโs best performing major commodity for the second year in a row. Indian Steel Association (ISA) calls for Government Intervention and demands a six-month ban on iron-ore exports, restriction of e-auction sale to steel- and pellet-makers. The Government suspects that the steel-makers might be indulging in the manipulation of production to lift prices, forming a cartel in the cement and steel industry. However, on the contrary, in the steel industry where two major players, namely, SAIL and Vizag Steel are government-owned are also a part of the same trend.
By the same token, materials used to create steel and finished goods can be costly to ship, a factor that may help determine the price.
Time of year has its effect on many industries, and those that use steel are no different. Holidays, weather, and seasonal highs and lows affect the output of new products, either raising or lowering demand. Seasonality can impact shipping patterns and transit modes.
All these events have left the MSMEs in jeopardy. Nothing was happening for several months because of the pandemic. The projects were shut down or were on hold. The rise in steel prices is eating into their narrow margins making it more and more difficult for them to sustain.
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-33.png)
TL;DR: MS angle and MS channel are both hot-rolled structural steel sections, but they are not interchangeable. Angles suit bracing and lightweight framing, while channels carry higher loads across a span. This guide compares their standards, weight, cost, and buying process so fabricators and contractors pick the right section on OFB. MS angle and MS
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F06%2Funnamed.png)
TL;DR: TMT bar grades under IS 1786 run from Fe415 to Fe600, each defined by minimum yield strength and ductility. Grade selection depends on structural load, seismic zone, and project type. This guide helps construction buyers and procurement teams compare all six grades and source verified TMT bars through OFB. Indian construction projects specify TMT
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-31.png)
TL;DR: India Steel Sector grew steadily in Q1 FY 2026-27, with higher production, consumption and imports of finished steel. Prices softened slightly in June across TMT bars, HR coils and other steel products, though they remain higher than last year. This report helps construction and manufacturing buyers plan bulk purchases, track price trends, and source