SS Hot Rolled Coil Price in India Today

Stainless steel hot rolled (HR) coils are flat-rolled products produced by rolling stainless steel slabs at temperatures above 1100 degrees C through a hot strip mill or Steckel mill. With thickness ranging from 3 mm to 12 mm, HR coils serve as the primary feedstock for cold rolling mills and are directly used in heavy industrial fabrication, structural applications, and equipment manufacturing.

In India, Jindal Stainless Limited operates the country's primary stainless steel hot rolling facilities at its integrated Jajpur plant (Odisha), equipped with a state-of-the-art Steckel mill capable of rolling a wide range of austenitic, ferritic, and duplex stainless steel grades. The former Salem Steel Plant (now part of Jindal Stainless) also contributes to domestic HR coil production.

SS HR coil pricing follows the same raw material linkage as CR coils - driven by nickel, chromium, and molybdenum costs - but at a lower price point since HR coils have not undergone the additional cold rolling, annealing, and finishing processes. OfBusiness provides industrial fabricators and equipment manufacturers with competitive HR coil pricing across all standard grades.

SS hot rolled coils are available in a comprehensive range of grades:

Austenitic Grades:

• 304/304L: Standard 18/8 Cr-Ni grade. Most widely used HR coil grade for general industrial fabrication and as feedstock for CR mills.
• 316/316L: Molybdenum-bearing grade for chemical, petrochemical, and marine applications requiring enhanced corrosion resistance.
• 310/310S: High Cr-Ni grade (25/20) for high-temperature applications up to 1150 degrees C. Used in furnace parts, kiln linings, and thermal processing equipment.
• 321/347: Stabilized grades (Ti/Nb) for high-temperature service where sensitization must be avoided. Used in exhaust manifolds and heat exchangers.

Duplex Grades:

• 2205 (UNS S31803): Austenitic-ferritic duplex grade with twice the yield strength of 304. Used in oil and gas, chemical, and desalination applications.

Specifications: Thickness: 3.0-12.0 mm | Width: 1000-1524 mm | Finish: No.1 (annealed and pickled) | Coil weight: 5-15 MT | Edge: Mill edge | Standards: IS 6911, ASTM A240, EN 10088-2.