Limited Orders And Decline In Steel Prices Weigh On Indian Pig Iron Industry
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2023%2F05%2FPig-Iron-Dpr.jpg)
The Pig Iron industry in India is facing challenges due to limited orders and Steel prices declining. Suppliers based in eastern India have reported a decrease in orders, leading them to further reduce their prices by Rs 500/ton today in Durgapur. This decline in demand can be attributed to the continuous drop in Steel prices, which has resulted in a downtrend in Pig Iron prices from the high levels witnessed in the previous week.
Additionally, the resumed downtrend in Coking Coal prices impacted Pig Iron demand, as major buyers are holding off on bulk procurements in anticipation of further price drops, trade participants have reported to Ofbusiness.
Key Factors Behind Downtrend
- Plummet Billet Prices- In a week, the MS Billet Pig Iron prices experienced a significant drop of around Rs 1,000/ton. This drop is similar to the price corrections seen in Pig Iron, which also decreased by Rs 700-1,200/ton during the same time.
- Declining Coal Prices- The imported Coking Coal price, which was volatile during the first half of May 2023, has started declining once again. In a week, it dropped by around $10/ton, and compared to the beginning of April 2023, it fell by $70-80/ton. For Australian premium Coal, the current price stands at approximately $235-240/ton CFR India. The downturn in Coal prices had an impact on Pig Iron demand as well.
- Narrowed Price Gap- In the eastern region, the price gap between Ingot, Billet, and Pig Iron has shrunk to around Rs 500-1,000/ton. This narrowing price gap has weakened the demand for Pig Iron, as ingot and Billet producers are exploring other substitutes such as CI Scrap. As a result, there is low procurement of Pig Iron at the prevailing offers.
- Exports- The export market for Pig Iron remains sluggish, with limited inquiries and low-price realizations. Consequently, the export material is being dumped in the domestic market, creating supply pressure from major suppliers.
Current Prices
- Steel Grade- The latest offers from Durgapur-based mills for Steel-grade Pig Iron are reported to be around Rs 42,000-42,200/ton ex-works in east India. This reflects a decrease of Rs 1,000-1,200/ton compared to the previous week’s offers. In the central Indian market of Raipur, the prices stand at around Rs 42,000/ton, which is a decline of Rs 700/ton from the previous week.
- Foundry Grade- The Foundry-grade Pig Iron prices have remained volatile, with changes of Rs 200-400/ton on a week-on-week basis. However, in Gujarat, there has been a decline of Rs 500/ton compared to the previous week. The current offers range from:
- Rs 45,000-45,500/ton- in Ludhiana
- Rs 45,500-46,000/ton in Delhi
- Rs 47,000-47,500/ton in Ahmedabad
- Note- The prices are on a delivered basis.
Is This The Bottom Line For Prices?
Suppliers in eastern India believe that Pig Iron prices are likely to remain under pressure due to sluggish global trends. The industry expects limited scope for recovery, considering the improving domestic supply, sluggish global trends, and the negative price directions of primary mills’ Finished Steel products. The ongoing challenges in the industry, such as limited orders and declining Steel prices, indicate a challenging period ahead for the Indian Pig Iron sector.
OFB’s Insight
The Indian Pig Iron industry is struggling due to limited orders and declining Steel prices. Factors such as price movements, falling Coal prices, narrowed price gaps, and sluggish export markets contribute to the downward trend. The industry anticipates continued pressure on Pig Iron prices, making recovery difficult in the near future.
Read more: Domestic Structural Steel Market Facing Challenges Amidst Weak Demand
For real time commodity prices, latest news, and insights, please download the all NEW and all FREE OfBusiness APP
Suggested Readings
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-32.png)
MS Channel Weight: ISMC Size Chart, Uses & Buying Guide
TL;DR: MS channels come in standard ISMC sizes, each with a fixed weight per meter that sets strength and cost. Picking the heaviest option isn’t always the right call; the correct size depends on load, span, and end use. This guide helps procurement managers choose the right channel and source it from verified suppliers on
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-33.png)
MS Angle vs Channel: Steel Section Comparison
TL;DR: MS angle and MS channel are both hot-rolled structural steel sections, but they are not interchangeable. Angles suit bracing and lightweight framing, while channels carry higher loads across a span. This guide compares their standards, weight, cost, and buying process so fabricators and contractors pick the right section on OFB. MS angle and MS
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F06%2Funnamed.png)
TMT Bar Grades Explained: Fe415, Fe500, Fe500D, Fe550, Fe550D, and Fe600
TL;DR: TMT bar grades under IS 1786 run from Fe415 to Fe600, each defined by minimum yield strength and ductility. Grade selection depends on structural load, seismic zone, and project type. This guide helps construction buyers and procurement teams compare all six grades and source verified TMT bars through OFB. Indian construction projects specify TMT
