Pig Iron Market Update: Prices In Eastern India Unlikely To Surge Further
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2023%2F06%2FDpr-billet-vs-pig-iron-prices.jpg)
Recently, the Steel Grade Pig Iron market in eastern India’s Durgapur region has seen a price increase, but participants suggest that a further surge is less likely as the supply is expected to improve. One of the major Pig Iron suppliers in the Durgapur spot market has resumed operations after facing a week-long shutdown due to technical issues in its furnace. This development is expected to alleviate some of the supply constraints in the market.
Contributing Factors
These factors indicate that the Pig Iron market may not experience significant price surges in the near future:
- Average Demand- Pig Iron’s domestic demand is relatively average, with producers receiving few orders, as assessed by OfBusiness from Durgapur-based plants.
- Coking Coal Price- The price of premium Coking Coal from Australia is currently hovering at $245/ton CFR India, experiencing a $10/ton increase week-on-week but a $15/ton drop month-on-month.
- Export Demand and Steel Demand- Paused exports and subdued domestic Steel demand globally have dampened participants’ hopes for further support in the industry.
Price Movement
While the Pig Iron market in eastern India’s Durgapur region may not witness a significant price increase, other markets across the country have seen volatile movements. In the northern and western regions, prices have remained volatile. However, in the central region’s Raipur market, prices have gained by Rs 500-700/ton week-on-week. This increase can be attributed to the surge in billet prices, which rose by Rs 1,000/ton during the same period.
Current Prices
- Steel Grade Pig Iron
- The latest offers are reported to be around:
- Durgapur- Rs 42,500-42,700/ton ex-works in eastern India. This reflects a surge of Rs 800/ton compared to prices on 1 June 2023.
- Raipur- Prices have risen by Rs 500-700/ton week-on-week, reaching Rs 41,500-41,700/ton.
- Ludhiana- Prices have remained stable at around Rs 43,800-44,000/ton.
- Foundry Grade Pig Iron
- Foundry-grade Pig Iron prices have experienced fluctuations due to subdued domestic demand and poor exports. Major Foundry-grade Pig Iron producers from western India have maintained their prices amidst these market conditions.
- The current offers are reported at:
- Ludhiana- Rs 45,300-45,500/ton
- Delhi- Rs 45,500-45,800/ton
- Ahmedabad- Rs 46,500-47,000/ton
- Note- The prices are on a delivered basis.
OFB’s Insight
Due to fluctuating Coal prices, stable Iron Ore prices, and subdued Steel demand globally, surges are less likely to happen in Durgapur’s Steel Grade Pig Iron market. Other markets across India have experienced varying price movements, with the central region’s Raipur market witnessing gains.
Read more: India’s Pellet Export To China Drops Over 50% In May 2023
For real time commodity prices, latest news, and insights, please download the all NEW and all FREE OfBusiness APP
Suggested Readings
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-32.png)
MS Channel Weight: ISMC Size Chart, Uses & Buying Guide
TL;DR: MS channels come in standard ISMC sizes, each with a fixed weight per meter that sets strength and cost. Picking the heaviest option isn’t always the right call; the correct size depends on load, span, and end use. This guide helps procurement managers choose the right channel and source it from verified suppliers on
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-33.png)
MS Angle vs Channel: Steel Section Comparison
TL;DR: MS angle and MS channel are both hot-rolled structural steel sections, but they are not interchangeable. Angles suit bracing and lightweight framing, while channels carry higher loads across a span. This guide compares their standards, weight, cost, and buying process so fabricators and contractors pick the right section on OFB. MS angle and MS
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F06%2Funnamed.png)
TMT Bar Grades Explained: Fe415, Fe500, Fe500D, Fe550, Fe550D, and Fe600
TL;DR: TMT bar grades under IS 1786 run from Fe415 to Fe600, each defined by minimum yield strength and ductility. Grade selection depends on structural load, seismic zone, and project type. This guide helps construction buyers and procurement teams compare all six grades and source verified TMT bars through OFB. Indian construction projects specify TMT
