Melting Scrap Prices Remain Volatile In India
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2023%2F01%2F22.jpg)
Scrap prices in major scrap-consuming regions of India have remained volatile. The fluctuation in steel prices and hefty imports of melting scrap have resulted in volatility in scrap prices as per spot demand. Melting scrap prices are generally affected by the price movement of sponge iron, billets, rebar, and imported offers.
In the last two weeks, scrap prices in major scrap-consuming regions fluctuated by Rs. 1,000/ ton.
Reference Prices
Current offers of HMS (80:20) grade stood at around Rs 37,000/ ton in southern India, while in western India, the prices are hovering at Rs 37,000-38,000/ ton on an ex-works basis (excluding taxes). Coming to northern India, in Punjab, the prices stand at nearly Rs 40,500-41,000/ ton ex-works (excluding taxes). For HMS grade, on containerized bookings, imported scrap offers to India were around USD 435-440/ ton CFR India.
Way Ahead
Market experts expect no major change in melting scrap prices, considering fluctuating secondary steel prices, higher offers of substitute products (sponge iron and pig iron) in India, as well as strong offers of scrap in the global market.
It is worth noting that a Turkey-based mill booked scrap at a higher price by USD 5-10/ ton as against the deal a day ago.
India’s ferrous scrap imports were recorded at around 0.5 million tons in November 2022 and December 2022 each, while in January 2023 it is estimated to come down to around 150,000-200,000 tons. It is because the major orders have been dispatched to the producers based south, west, and northern regions already.
Overall scrap imports in India were recorded at around 8 million tons in 2022, which was nearly two-fold as against close to 4 million tons in 2021.
Read more: Mid-Sized Steel Mills In India Reported Limited Inquiries
Suggested Readings
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-33.png)
MS Angle vs Channel: Steel Section Comparison
TL;DR: MS angle and MS channel are both hot-rolled structural steel sections, but they are not interchangeable. Angles suit bracing and lightweight framing, while channels carry higher loads across a span. This guide compares their standards, weight, cost, and buying process so fabricators and contractors pick the right section on OFB. MS angle and MS
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F07%2FTemplate-OFb-32.png)
MS Channel Weight: ISMC Size Chart, Uses & Buying Guide
TL;DR: MS channels come in standard ISMC sizes, each with a fixed weight per meter that sets strength and cost. Picking the heaviest option isn’t always the right call; the correct size depends on load, span, and end use. This guide helps procurement managers choose the right channel and source it from verified suppliers on
/https%3A%2F%2Fblog.ofbusiness.com%2Fwp-content%2Fuploads%2F2026%2F06%2Funnamed.png)
TMT Bar Grades Explained: Fe415, Fe500, Fe500D, Fe550, Fe550D, and Fe600
TL;DR: TMT bar grades under IS 1786 run from Fe415 to Fe600, each defined by minimum yield strength and ductility. Grade selection depends on structural load, seismic zone, and project type. This guide helps construction buyers and procurement teams compare all six grades and source verified TMT bars through OFB. Indian construction projects specify TMT
